Using Kx-Vc Series Nat Traversal Service; Adding Contacts To The Contact List; Registering A Single-Party Contact; Registering A Multiple-Party Contact - Panasonic KX-VC300 User Manual
Hd visual communication unit nat traversal service user's guide
Hide thumbs
Also See for KX-VC300:
- User manual (172 pages) ,
- Operating instructions manual (142 pages) ,
- Operating manual (122 pages)
Table of Contents
Advertisement
Using KX-VC Series NAT Traversal Service
Adding Contacts to the
Contact List
Registering a Single-party
Contact
1.
Press [Menu].
•
The Menu screen is displayed.
2.
Use [
][
] to select "New Contact" and press
[Enter].
•
The contact list registration screen is displayed.
3.
Use [
][
] to select the following items for input:
"Group/Site": Enter a name for the contact (up to
24 characters).
"Speed Dial": Enter a speed dial number (1–300).
"Multi-Point": Use [
"Terminal ID": Enter a Terminal ID (7 digits).
4.
Press [G].
•
A dialog box to confirm the saving of settings is
displayed.
5.
Use [
][
] to select "Yes" and press [Enter].
•
The contact list screen is displayed.
Note
•
To continue entering another contact, press
[B] and repeat steps 3–5.
6.
Press [Home].
•
The Home screen is displayed.
22
NAT Traversal Service User's Guide
][
] to select "No".
Registering a Multiple-party
Contact
Note
•
If you are using the KX-VC300, registering a
multiple-party contact can only be done after
purchasing an activation key card
(KX-VCS301) to activate multiple-party video
conference calls. For details about the
activation key, contact your dealer.
1.
Press [Menu].
•
The Menu screen is displayed.
2.
Use [
][
] to select "New Contact" and press
[Enter].
•
The contact list registration screen is displayed.
3.
Use [
][
] to select the following items for input:
"Group/Site": Enter a name for the video
conference call (up to 24 characters).
"Speed Dial": Enter a speed dial number (1–300).
"Multi-Point": Use [
"3 sites".
For "Site 1"/"Site 2"/"Site 3": Use the following
procedure to select these from the contact list
screen.
1.
Use [
][
] to select "Site 1", "Site 2" or
"Site 3".
2.
Press [Enter].
•
The contact list screen is displayed.
3.
Select a contact using [
•
You can use [
buttons of the remote control to select the
displayed tab (Page 28).
4.
Press [Enter].
][
] to select "2 sites" or
][
].
][
] or the numeric
Document Version 2012-03
Advertisement
Table of Contents
