3.
Use [
][
] to select the following items and enter
a password (4–10 digits):
"Current password": Enter the current password
(default: 00000000).
"New password": Enter the new password.
"Retype new password": Enter the new password
again.
Note
•
Please change the default login password
the first time the unit is installed.
•
Be sure to keep the password safe.
4.
Press [G].
•
A dialogue box to confirm the changing of
settings is displayed.
5.
Use [
][
] to select "Yes" and press [Enter].
•
The administrator menu screen is displayed.
6.
Press [Home].
•
The Home screen is displayed.
Making Encryption Settings
Note
•
Be careful when changing encryption settings
because doing so may cause you to become
unable to communicate with other parties.
•
There is a danger that encryption settings will
be changed by a third party. Therefore, be
careful when managing the administrator
password and giving users the authority to
change encryption settings.
•
If an encryption key is not set for SIP
communication, you cannot enable encryption.
•
Be aware that if encryption is disabled,
eavesdropping might be possible on networks
that are not secured against such actions.
1.
Log in to the administrator menu (Page 112).
•
The administrator menu screen is displayed.
Document Version 2013-09
2.
Use [
][
] to select "Encryption" and press
[Enter].
•
The encryption settings screen is displayed.
3.
Use [
][
] to select the following items for input:
Note
•
When "SIP" is set to "OFF" on the call type
settings screen (Page 115), "Access
mode (SIP)", "Encryption (SIP)" and
"Encryption Key (SIP)" cannot be set.
•
When "H.323" is set to "OFF" on the call
type settings screen (Page 115), "Access
mode (H.323)" and "Encryption (H.323)"
cannot be set.
"Access mode (SIP)"/"Access mode (H.323)":
Use [
][
] to select "Admin" (default) or
"User".
•
When "Admin" is selected, only the network
administrator can enable/disable encryption.
•
When "User" is selected, any users can
enable/disable encryption (Page 99,
Page 132).
"Encryption (SIP)"/"Encryption (H.323)": Use
[
][
] to select whether to enable encryption.
–
"ON": Encryption is enabled.
–
"OFF" (default): Encryption is disabled.
Note
•
If the "Encryption (SIP)"/"Encryption (H.
323)" setting does not match that of the
other party in a video conference call, the
video conference call will not start.
•
This setting is available only when
"Admin" is selected for "Access mode
(SIP)"/"Access mode (H.323)".
Contacts and Settings
User Manual
113