Making Encryption Settings - Panasonic KX-VC300 Operating Instructions Manual

3.
Use [ ][ ] to select the following items and enter
a password (4–10 digits):
"Current password": Enter the current password
(default: 00000000).
"New password": Enter the new password.
"Retype new password": Enter the new password
again.
Note
•
Please change the default login password
the first time the unit is installed.
•
Be sure to keep the password safe.
4.
Press [G].
•
A dialog box to confirm the changing of settings
is displayed.
5.
Use [ ][ ] to select "Yes" and press [Enter].
•
The admin menu screen is displayed.
6.
Press [Home].
•
The Home screen is displayed.

Making Encryption Settings

Note
•
Be careful when changing encryption settings
because doing so may cause you to become
unable to communicate with other parties.
•
There is a danger that encryption settings will
be changed by a third party. Therefore, be
careful when managing the administrator
password and giving users the authority to
change encryption settings.
•
If an encryption key is not set, you cannot
enable encryption.
•
Be aware that if encryption is disabled,
eavesdropping might be possible on networks
that are not secured against such actions.
1.
Login to the administrator menu (Page 102).
•
The admin menu screen is displayed.
Document Version 2012-03
2.
Use [ ][ ] to select "Encryption" and press
[Enter].
•
The encryption settings screen is displayed.
3.
Use [ ][ ] to select the following items for input:
"Access mode": Use [
"Admin" (default) or "User".
•
When "Admin" is selected, only the network
administrator can enable/disable encryption.
•
When "User" is selected, any user can enable/
disable encryption (Page 91, Page 112).
"Encryption": Use [
enable encryption.
–
"ON": Encryption is enabled.
–
"OFF" (default): Encryption is disabled.
Note
•
To select "ON", specifying the encryption
key is required (Page 103).
•
If the "Encryption" setting does not match
that of the other party in a video conference
call, the video conference call will not start.
•
This setting is available only when
"Admin" is selected for "Access mode".
•
When connecting to an MCU or
non-Panasonic video conference system,
set "Encryption" to "OFF" because
encryption is not available. Encryption must
be disabled on both sides.
"Encryption Key": Enter an encryption key (4 to
256 characters [alphanumeric, space, symbols])
(Page 116).
Note
•
&, <, >, comma (,), double quotation mark
(") cannot be entered.
Contacts and Settings
][ ] to select
][ ] to select whether to
Operating Manual 103