Table of Contents
Advertisement
Treble
Adjusts the high frequency range.
Presence
Adjusts the very high frequency range.
The above 6 effect types have the same parameters.
PARM1
Type
Q1 selects a peaking equalizer with a narrow Q
curve and Q2 selects a peaking equalizer with a
wide Q curve. SH selects a shelving equalizer.
HPF enables a high-pass fi lter and LPF a low-
pass fi lter. Available Type settings depend on
the frequency band (see Table 1).
[Table 1]
Band
Sub-Bass
Bass, Lo-Mid, Hi-Mid, Treble
Presence
Original
When a preamplifi er is selected for the PRE-AMP module, the original
or a recommended cabinet setting can be selected. When a stomp box
or synthesizer is selected for the PRE-AMP module, or if the PRE-AMP
module is off, "8x10 AG" is selected.
4x12 SB (4x12 Superbass)
Simulates the Marshall 1935A.
4x10+1x15 TE (4x10+1x15 Trace Elliot)
Simulates the Trace Elliot 1048H/1518.
4x10 SWR (4x10 SWR)
Simulates the SWR Goliath.
4x10 GK (4x10 Gallien Krueger)
Simulates the Gallien Krueger 410RBH.
1x18 AC (1x18 Acoustic)
Simulates the Acoustic 301.
1x15 AG (1x15 Ampeg)
Simulates the Ampeg B-15R combo amp cabinet.
The above 14 effect types have the same parameters.
PARM1
CabMix
Adjusts the mixing ratio between original sound and cabinet sound.
MOD/EFX2 (Modulation/Effects 2) module
This module comprises modulation and delay effects such as chorus, pitch shifter, delay, and echo.
Chorus
This effect mixes a variable pitch-shifted component to the original signal, resulting in full-bodied resonating sound.
PARM1
Depth
0 – 100
Adjusts the modulation depth.
ZOOM B9.1ut
Q1, Q2, SH,
f
HPF, LPF
Selects the frequency to adjust.
Available Type settings
Q1,Q2,SH,HPF
Q1,Q2
Q1,Q2,SH,LPF
CABINET module
Ths effect simulates the sound of the amp cabinet.
2 – 100
PARM2
1 – 50
Rate
Adjusts the modulation rate.
PARM2
See Table 2
G
Sets the gain.
[Table 2]
Band
Available f settings
Sub-Bass
50 – 120
Bass
120 – 200
Lo-Mid
200 – 450
8x10 AG (8x10 Ampeg)
Simulates the Ampeg 810E.
4x12 BM (4x12 Bassman)
Simulates the Fender Bassman combo amp cabinet.
4x10 HA (4x10 Hartke)
Simulates the Hartke 4.5XL.
4x10 AL (4x10 Aguilar)
Simulates the Aguilar GS410.
2x15 EV (2x15 Electro-Voice)
Simulates the Electro-Voice B-2150M.
1x15 PT (1x15 Polytone)
Simulates the Polytone Mini Brute III combo amp cabinet.
1x12 BE (1x12 Bag End)
Simulates the Bag End S-12B.
PARM3
Lo-Cut
Off – 800
Specifi es the low-range cutoff point
for the effect sound.
Effect Types and Parameters
PARM3
-12 – +12
Band
Available f settings
Hi-Mid
450 – 1.2k
Treble
1.0k – 3.6k
Presence
3.6k – 8.0k
PARM4
Mix
Adjusts the level of the effect sound
mixed to the original sound.
0 – 100
71
Advertisement
Table of Contents
