Table of Contents
Advertisement
Other Functions
indication "Off" is shown, press the [PRE-AMP]
key once more to turn the module on.
2.
Turn the [TYPE] knob to select the
effect type "PedalSyn" (pedal synth).
The display changes as follows.
[TYPE] knob
When "PedalSyn" is selected as effect type, the
foot switches on the front panel are assigned
only to the pedal synth function.
NOTE
When the pedal synth function is enabled, the
"Loop" and "SOS" functions of the DELAY
module become unavailable.
HINT
Function foot switch 2 serves to turn the PRE-
Foot switch sound arrangement with different scales (for C3 keynote)
Scale = M (Major)
C
Scale = m (Minor)
C
Scale = C (Chromatic)
C
56
D
E
F
D
E
F
C
D
D
AMP module off. The other foot switches are
used to produce pedal synth sound.
3.
Turn parameter knob 3 to select
the pedal synth scale and the
sound generation method.
The display changes as follows.
Parameter knob 1
Scale Sound generation method
Three types of pedal synth scales are available:
M (Major), m (Minor), C (Chromatic). The
sound arrangement with each scale is shown in
the illustration below.
The pedal synth function has two operation
modes for producing sound: TG (trigger) and
HD (hold).
The differences in operation are as follows.
Turns PRE-AMP
module off
G
A
B
Turns PRE-AMP
module off
G
A
B
Turns PRE-AMP
module off
E
F
F
C
C
G
ZOOM B9.1ut
Advertisement
Table of Contents
