Zoom B9.1ut Operation Manual page 11

[Pre-amp section]
Pre-amp module output level
Distortion
intensity
Very low range boost/cut
Selecting patches
1.
Press the [MANUAL] key so that the key is off.
The B9.1ut is in play mode.
2.
To select a patch, use the PATCH/BANK [▼]/[▲] foot
switches to select a group/bank, and then use foot
switches 1 – 4.
3.
To return to manual mode, press the [MANUAL] key
again so that the key is on.
ZOOM B9.1ut
Quick Guide 1 (Manual Mode/Play Mode Operation)
Low range boost/cut
Hi-mid range boost/cut
Lo-mid range boost/cut
(play mode)
Ultra high range boost/cut
High range boost/cut
Pre-amp operation
The pre-amp section allows
you to adjust distortion
intensity and EQ.
1.
Turn the knobs of the
pre-amp section to
make adjustments.
The B9.1ut goes into edit
mode.
2.
To return to manual
mode or play mode,
press the [EXIT] key.
11