Zoom B9.1ut Operation Manual page 74

Effect Types and Parameters
PdlMonoPitch (Pedal Mono Pitch)
This is a pitch shifter specially for monophonic sound (single-note playing), which allows the pitch to be shifted in real time with the expression
pedal.
PARM1
Color 1 – 9
Selects the type of pitch change
caused by the pedal (see Table 3 on
page 72).
Cry
This effect varies the sound like a talking modulator.
PARM1
1 – 10
Range
Adjusts the frequency range for
modulation.
ReverseDelay
This is a special delay where the effect sounds as if playing in reverse.
PARM1
Time 10 – 1000ms
Sets the delay time.
BendChorus
This effect provides pitch bending that uses the input signal as trigger and processes each note separately.
PARM1
Depth -50 – 50
Adjusts the effect depth. Positive
values cause upward bending and
negative values cause downward
bending.
CombFilter
This effect uses the comb fi lter characteristics generated by using fi xed modulation on the fl anger as an equalizer.
PARM1
Frequency 1 – 50
Adjusts the frequency to be
emphasized.
Air
This effect reproduces the ambience of a room, to create spatial depth.
PARM1
Size 1 – 100
Adjusts the size of the simulated
space.
AutoWah
This effect varies wah in accordance with picking intensity.
A-Resonance (Auto Resonance)
This effect varies the resonance fi lter frequency in accordance with picking intensity.
The above two effect types have the same parameters.
PARM1
Sense -10 – 10
Adjusts the effect sensitivity.
Negative values result in downward
fi lter action.
74
PARM2
Mode Up, Down
Sets the direction of the pitch
change to Up or Down.
PARM2
0 – 10
Resonance
Adjusts the resonance intensity.
PARM2
0 – 100
FeedBack
Adjusts the amount of feedback.
PARM2
Attack 1 – 10
Adjusts the attack time for the
bending effect. Higher setting
values result in slower attack.
PARM2
Resonance -10 – 10
Adjusts the resonance intensity.
PARM2
Refl ex 0 – 10
Adjusts the amount of refl ections
from the wall.
PARM2
Resonance 0 – 10
Adjusts the intensity of the effect
character.
PARM3
Tone 0 – 10
Adjusts the tonal quality of the
sound.
PARM3
-10 – 10
Sense
Adjusts the effect sensitivity.
PARM3
HiDamp 0 – 10
Adjusts the treble attenuation of the
delay sound.
PARM3
Release 1 – 10
Adjusts the release time for the
bending effect. Higher setting
values result in slower release.
PARM3
HiDamp 0 – 10
Adjusts the treble attenuation of the
effect sound.
PARM3
Tone 0 – 10
Adjusts the tonal quality of the
sound.
PARM3
DryMix 0 – 100
Adjusts the original sound mixing
ratio.
PARM4
0 – 100
PdlPosi
Sets the pitch shift amount.
Depending on the "Color" setting,
the balance between original sound
and effect sound also changes
accordingly.
PARM4
0 – 100
Balance
Adjusts the balance between
original sound and effect sound.
PARM4
0 – 100
Balance
Adjusts the balance between
original sound and effect sound.
PARM4
Balance 0 – 100
Adjusts the balance between
original sound and effect sound.
PARM4
Mix 0 – 100
Adjusts the level of the effect sound
mixed to the original sound.
PARM4
Mix 0 – 100
Adjusts the level of the effect sound
mixed to the original sound.
ZOOM B9.1ut