Zoom B9.1ut Operation Manual page 19

2.
Press a foot switch 1 - 4 which
corresponds to the patch you
want.
The LED of the pressed switch lights up,
indicating that a new patch has been called up.
HINT
When you press a foot switch whose LED is lit,
the same patch is called up once more.
3.
To switch to a patch in another
bank, use the PATCH/BANK [▼]/
[▲] foot switches to change the
bank and then use foot switches 1
– 4 to select the patch.
PATCH/BANK [▼]/[▲] foot switches
Foot switches 1 – 4
HINT
• You can also switch the group/bank/patch by
turning the [TYPE] knob.
• In play mode, as in manual mode, you
can use the knobs on the panel to control
major parameters of the pre-amp section
(distortion intensity, EQ boost/cut, etc.) and
the Accelerator. For information on how to do
this, see "Adjusting the sound" on page 16.
• From play mode, you can switch to edit mode
for editing patches. For details on edit mode,
see page 23.
ZOOM B9.1ut
Selecting Patches for Playing (Play Mode)
4.
To return to manual mode, press
the [MANUAL] key.
19