Zoom B9.1ut Operation Manual page 78

Effect Types and Parameters
MultiTapDly (Multi Tap Delay)
This effect produces several components with different delay times.
PARM1
Time 1 – 3000ms
Sets the basic delay time.
PanDelay
This is a stereo delay with a delay time of up to 3000 ms.
PARM1
Time 1 – 3000ms
Sets the delay time.
PingPongDly (Ping Pong Delay)
This is a ping-pong delay with a delay time of up to 3000 ms.
PingPongEcho
This is a ping-pong type echo where the delay sound alternates between left and right. Long delay settings up to 3000 ms are possible.
The above two effect types have the same parameters.
PARM1
Time 1 – 3000ms
Sets the delay time.
AutoPan
This effect cyclically moves the panning position of the sound.
PARM1
L50 – L2, 0,
Width
R2 – R50
Adjusts the scope of sound position
movement.
Z-Delay
This is a delay effect which allows adjustment of panning and mix level using the pedal or another control source. Try assigning the vertical
direction of the Z-pedal (PV1 – PV4) to the "Pan" parameter and the horizontal direction (PH1 - PH4) to the "Mix" parameter.
PARM1
Time 1 – 3000ms
Sets the delay time.
Z-Dimension
This is a spatial effect which allows adjustment of depth, panning, and reverberation using the pedal or another control source. Try assigning the
vertical direction of the Z-pedal (PV1 – PV4) to the "Pan" parameter and the horizontal direction (PH1 – PH4) to the "Depth" parameter.
PARM1
L50 – L2, 0,
Pan
R2 – R50
Adjusts the left/right panning of
the sound.
Z-Tornado
This is a delay effect which causes the effect sound to swirl like a tornado. Try assigning the vertical direction of the Z-pedal (PV1 – PV4) to the
"Rate" parameter and the horizontal direction (PH1 – PH4) to the "Width" parameter.
PARM1
Time 1 – 3000ms
Sets the delay time.
78
PARM2
Pattern 1 – 8
Selects the delay time combination
pattern for the taps.
PARM2
0 – 100
FeedBack
Adjusts the feedback amount.
PARM2
0 – 100
FeedBack
Adjusts the feedback amount.
PARM2
0 – 50
Rate
Adjusts the modulation rate.
PARM2
FeedBack 0 – 100
Adjusts the amount of feedback.
PARM2
Depth 0 – 100
Adjusts the amount of feedback.
PARM2
Rate 1 – 50
Adjusts the modulation rate.
PARM3
Tone 0 – 10
Adjusts the tonal quality of the
sound.
PARM3
HiDamp 0 – 10
Adjusts the treble attenuation of the
effect sound.
PARM3
HiDamp 0 – 10
Adjusts the treble attenuation of the
effect sound.
PARM3
0 – 10
Depth
Adjusts the modulation depth.
PARM3
L50 – L2, 0,
Pan
R2 – R50
Adjusts the delay sound left/right
panning.
PARM3
Decay 1 – 30
Adjusts the reverb duration.
PARM3
L50 – L2, 0,
Width
R2 – R50
Adjusts the sound shift range.
PARM4
0 – 100
Mix
Adjusts the level of the effect sound
mixed to the original sound.
PARM4
L50 – L2, 0,
Pan
R2 – R50
Adjusts the panning (left/right)
position of the sound.
PARM4
0 – 100
Mix
Adjusts the level of the effect sound
mixed to the original sound.
PARM4
0 – 10
Wave
Selects a waveform for modulation.
Higher setting values result in
stronger clipping of the waveform
tips, giving a stronger auto-panning
effect.
PARM4
0 – 100
Mix
Adjusts the level balance between
original sound and effect sound.
PARM4
Mix 0 – 100
Adjusts the mixing level of the
reverb sound.
PARM4
Mix 0 – 100
Adjusts the mixing level of the
delay sound.
ZOOM B9.1ut