Xerox WorkCentre 5020DN User Manual page 57

NOTE: This button is selectable when using the Document Glass with the N-up
feature. The button is not selectable when using the Document Feeder as the size of
the original document is automatically detected.
NOTE: The paper size table can be switched between metric ([A/B Series (8K/16K)])
and inches ([Inch Series (8.5 x 13")], [Inch Series (8.5 x 13.4")], [Inch Series]) when
the machine is in the System Setting Mode (menu number: 21). For more information
on the system settings, refer to the System Administration Guide. The following three
options change depending on the selected paper size table.
Inches: 11 x 17" SEF, 8.5 x 14" SEF, 8.5 x 13.4" SEF,
8.5 x 13" SEF
Metric: A3 SEF, B4 SEF
Select this when the document size is 11 x 17", 8.5 x 14", 8.5 x 13.4",
8.5 x 13", A3, or B4, and when scanning documents in the SEF
orientation.
Inches: 8.5 x 11" SEF
Metric: A4 SEF, B5 SEF
Select this when the document size is 8.5 x 11", A4, or B5, and when
scanning documents in the SEF orientation.
Inches: 8.5 x 11" LEF
Metric: A4 LEF, B5 LEF
Select this when the document size is 8.5 x 11", A4, or B5, and when
scanning documents in the LEF orientation.
If the document is 11 x 17" SEF, 8.5 x 14" SEF, 8.5 x 13.4" SEF, or 8.5 x 13" SEF
(A3 SEF or B4 SEF if the paper size table is metric)
<Original Size>
4-up
button
Making
4-up copies
If the document is 8.5 x 11" SEF
(A4 SEF or B5 SEF if the paper size table is metric)
<Original Size>
4-up
button
Making
4-up copies
Paper Orientation
in the Tray
LEF
How to Scan
SEF
Left
Bottom
Paper Orientation
in the Tray
LEF
How to Scan
SEF
Left
Bottom
Making Special Copies
Changing the Size and
Refer to
Orientation of Paper in the Trays on
page 45
to change the orientation of
paper.
Top
Right
Refer to Changing the Size and
Orientation of Paper in the Trays on
page 45 to change the orientation of
paper.
Top
Right
Document
Glass
Document
Glass
57