Xerox WorkCentre 5020DN User Manual page 62

4 Copying
If using the Document Feeder to scan documents
1.
Press the <N-up/ID Card Copy> button
to select the N-up feature.
2.
Load the document as described in the
charts below.
NOTE: Depending on the paper size table the machine is programmed to use, the
document sizes that can be detected by the Document Feeder change. Switch the
paper size table as necessary in the System Setting Mode (menu number: 21). For
information about the document sizes detectable by the Document Feeder, refer to the
Appendix in the System Administration Guide.
If the document is 11 x 17" SEF, 8.5 x 14" SEF, 8.5 x 13.4" SEF, 8.5 x 13" SEF,
8.5 x 11" SEF, 5.5 x 8.5" SEF, A3 SEF, B4 SEF, A4 SEF, B5 SEF, A5 SEF,
or 8K SEF
4-up
Making
4-up copies
62
4-up
Copies four pages of the original documents onto one side of the
sheet.
2-up
Copies two pages of the original documents onto one side of the
sheet.
Paper Orientation
in the Tray
LEF
How to Scan
SEF
Left
Bottom
<N-up/ID Card Copy>
Changing the Size and
Refer to
Orientation of Paper in the Trays on
page 45
to change the orientation of
paper.
Top
Right
button
<Original Size>
button
Document
Feeder