Xerox WorkCentre 5020DN User Manual page 53

For information on how to make copies using the N-up feature, refer to
Copies (Copying Multiple Pages onto a Single Sheet) on page 56
For information on how to make copies using the ID Card Copy feature, refer to
Copies (Copying an ID Card-shaped Document onto a Sheet) on page 66
<Original Type> button
Select the original document type.
For more information, refer to
<2-sided> button
Select whether to copy on one side or both sides of a sheet.
For more information, refer to
<Copy Output> button
Select whether or not to collate the output.
For more information, refer to
4.
Press the <Paper Supply> button to
select a tray.
NOTE: Press the <Paper Supply> button
repeatedly until the desired tray is lit on the
Machine Diagram (mimic). For information
on the <Paper Supply> button, refer to
<Paper Supply> button on page 26
NOTE: When Tray 1 and Tray 2 are lit
simultaneously, the machine selects a tray
automatically.
NOTE: When pressing the <Paper Supply> button, the size and orientation of paper in
the selected tray appears in the Display for three seconds. After that, the Display
switches back to the previously displayed value.
5.
Enter the copy quantity using the
numeric keypad. The entered number
appears in the Display.
NOTE: If you have entered an incorrect
value, press the <C> button to clear the
wrongly entered value.
6.
Press the <Start> button to start the
copy job.
<Original Type> button on page 32
<2-sided> button on page 32
<Copy Output> button on page 33
.
<C> button
Copying Procedure
4-up/2-up
.
ID Card
.
.
.
.
<Paper Supply>
button
Numeric keys
<Start> button
53