Xerox WorkCentre 5020DN User Manual page 74

5 Scanning
<Original Type> button
Select the original document type.
For more information, refer to
<Lighten/Darken> button
Select the density of the scanned data.
For more information, refer to
7.
Press the <Start> button to start the
scanning.
NOTE: When the scanned data is stored in
the mailbox, the <Job in Memory> indicator
lights up.
If you have more documents to scan
• When scanning from the Document Glass
When using the Document Glass, you can scan one page after another to create a
multi-page set of data.
To add the next document, Add Original must be set to [1] (Enabled) in the System
Setting Mode (menu number: 201). For more information, refer to the System
Administration Guide.
1) The indicator next to the <Scan
2) Load the next page on the
3) Specify the following scan features as necessary by referring to Step 6.
4) Press the <Start> button to scan the loaded page.
5) After scanning the last page, press the <Scan Completed> button.
74
Completed> button blinks after the
first page of the document is
scanned.
Document Glass in the same
orientation as the previously
scanned page.
• <Original Type> button
• <Lighten/Darken> button
<Original Type> button on page 32
<Lighten/Darken> button on page 30
<Job in Memory>
indicator
<Scan Completed>
button
.
.
<Start> button