Safety Notes; Warning Markings; Electrical Supply - Xerox WorkCentre 5020DN User Manual

Hide thumbs Also See for WorkCentre 5020DN:
Table of Contents

Advertisement

NOTE: Diagrams used in this User Guide apply to a fully configured machine and
therefore may not exactly represent the configuration being used.
NOTE: All the screen shots used in this User Guide are taken using Windows XP.

Safety Notes

Read these safety notes carefully before using this product to make sure you operate
the equipment safely.
Your Xerox product and recommended supplies have been designed and tested to
meet strict safety requirements. These include safety agency approval, and
compliance to established environmental standards. Please read the following
instructions carefully before operating the product and refer to them as needed to
ensure the continued safe operation of your product.
The safety and environment testing and performance of this product have been verified
using Xerox materials only.
WARNING: Any unauthorized alteration, which may include the addition of new
functions or connection of external devices, may impact the product
certification. Please contact your authorized Service Provider for more
information.

Warning Markings

All warning instructions marked on or supplied with the product should be followed.

Electrical Supply

This product shall be operated from the type of electrical supply indicated on the
product's data plate label. If you are not sure that your electrical supply meets the
requirements, please consult your local power company for advice.
This product is supplied with a plug that has a protective earth pin. This plug will fit only
into an earthed electrical outlet. This is a safety feature. To avoid risk of electric shock,
contact your electrician to replace the electrical outlet if you are unable to insert the plug
into it. Never use an earthed adapter plug to connect the product to an electrical outlet
that lacks an earth connection terminal.
Operator Accessible Areas
This equipment has been designed to restrict operator access to safe areas only.
Operator access to hazardous areas is restricted with covers or guards, which would
require a tool to remove. Never remove these covers or guards.
WARNING This WARNING alerts users to areas of the product where there is
the possibility of personal injury.
WARNING This WARNING alerts users to areas of the product where there
are heated surfaces, which should not be touched.
WARNING: This product must be connected to a protective earth
circuit.
Safety Notes
9

Advertisement

Table of Contents
loading

This manual is also suitable for:

Workcentre 5020

Table of Contents