Connecting To A Digital Recorder; Connecting To A Stereo Component - Denon DVD-2200 Operating Instructions Manual

$ Set the "AUDIO SETUP" defa@t setting as shown below, (See page 33.)
"DIGIFAL OUT" -+ "PCM"
"LPCM (44,1 kHz/48kHz)" -+ "ON"
Playing DVDs with incorrect settings may result noise that co@d damage your ears or the speakers,
DVD-2200
NOTE:
o Digital audio signals cannot be output when playing Super Audio CDs. Use analog connections to record Super Audio CDs,
DVD-2200
®66
Stereo component
@
o©0© @
/
/
If necessary, connect the video terminals, referring to page 10,
NOTE:
When connecting to a 2-channel audio stereo device, set "AUDIO CHANNEL" under "AUDIO SETUP" at "SETUP" to "2 CHANNEL"
(see page 30). For m@ti-channel sources, the signals are down-mixed into two channels (analog).
(Only the front left and right channels are output for sources for which down-mixing is prohibked.)
15