Changing The Default Settings - Denon DVD-2200 Operating Instructions Manual

CHANGING THE DEFAULT SETTINGS
Make the initial settings to suit your usage conditions before starting playback.
The initial settings are retained until they are next changed, even if the power is turned off.
1
lm
@®0®
®®®3
®®®©
®®O0
i
®®
0000
@@Q
O®®
1
2
3
Turn on the power.
Press the power button, tile power indicator lights and the power turns
on.
In the stop mode, press the SETUP button.
Tile setup (delault settings) screen appears
NOTE: For son/e menus, the initial values ('an be changed during playback.
DISC SETUP
Use this to set the language to be used when playing the disc. If the set
language is not offered on that disc, the discs default language is set.
OSD SETUP
Use this to set the language for the defauk setting screen and messages
displayed on the TV screen ("PLAY", etc,).
WDEO SETUP
Use this to set the DVD-2200's screen mode. (TV aspect and TV type,)
AUDmO SETUP
Use this to set the DVD-2200's audio output mode,
(Digital and LPCM output settings.)
Use this to disable playback of adult DVDs so that children cannot watch
them, Note that playback of adult DVDs cannot be disabled if the rating
level is not recorded on tile DVD.
OTHER SETUP
These include special settings CAPTIONS and COMPRESSION.
Use the _ and _ cursor buttons to select the desired setting item, then
s?c_- Light
_ON/STANDBY
Main unit
POWER
%
Remote control unit
press the ENTER button,
Select "DISC SETUP", (See page 23.)
Select "OSD SETUP", (See page 26.)
Select "VIDEO SETUP". (See page 27.)
Select "AUDIO SETUP". (See page 30.)
Select "RATINGS". (See page 34.)
Select "OTHER SETUP". (See page 36.)
SETUP
%
Remote control unit
Remote control unit
%
Remote control unit
-$ To exit the setup mode
Use the Ir cursor button to select "EXIT SETUP", then press the ENTER button, It is also possible to quit by pressing the SETUP button
on the remote control unit.
21