Troubleshooting - Denon DVD-2200 Operating Instructions Manual

TROUBLESHOOTING
m Are aim the connections correct ?
m Are you following the instructions in the manual ?
m Are the amplifier and speakers operating prnper}¥ ?
If the DVD-2200 does not seem to be functioning
properly,
check the table below, If this does not soWve tile probJem, the DVD-2200 may
be damaged, '[urn off the power, unplug the power cord from the power outlet, and contact your store of purchase or nearest Denon
sales office.
Symptom Check Page
o Plug the power supply cord securely into the power outlet. 10-15,
Power does not turn on, 17
Playback does not start when PLAY o Is there condensation on the disc or player ? (Let stand for 1 or 2 hours.)
button is pressed, o Discs other than DVDs, video CDs, music CDs and Super Audio CDs cannot be played. 8
Playback stops immediately, o Disc is dirty, Wipe off the dirt, 9
Check the connections. 10_.,15
Picture does not appear. Set the TV's input to "video",
Sound is not produced or sound quality
is poor.
o
o
o
o
o
Check the connections,
Properly set the input of the TV, stereo, etc.
Check the "DIGITAL OUT" and "COMPRESSION" settings,
Digital signals cannot be output with Super audio CDs. Use analog connections.
Area/layer of Super audio CD being played (CD/stereo/multi-channel) does not match
amplifier connections,
10_.,15
30, 33,
36, 37
14, 15
14, 15,
30, 33
Menu playback of video CD's is not o Menu playback is not possible with anything but video CDs with playback control, 38, 39
possible,
Picture is disturbed during the search o Some disturbance is normal.
operation,
Buttons do not operate, o Some operations are disabled for some discs, 39
o Subtitles are not displayed for DVDs not containing subtitles,
No subtitles are displayed.
o Subtitles are turned off, Turn the subtitles setting on. 23, 24
o The audio (or subtitle) language does not switch for discs which do not include multiple
Audio (or subtitle) language does not audio (or subtitle) languages,
switch, o For some discs the audio (or subtitle) language cannot be switched when the operation to 60
switch it is performed, but can be switched on the menu screens.
o The angle cannot be switched for DVDs which do not contain multiple angles. In some 58
Angle does not switch, cases multiple angles are only recorded for specific scenes,
Playback does not start when the title is o Check the "RATINGS" setting, 34, 35
selected,
o While the player is in the stop mode, hold the player's SKIP _q button and the PLAY
The password for rating level has been
button down simultaneously and then hold the OPEN/CLOSE button down for longer than
forgotten. 3 seconds (until "INITIALIZE" disappears from the TV monitor),
Reset all the setting to Factory
PreSeta The lock will be released and all defauk settings and picture settings will return to the
default values,
The disc is not played with the audio or o The disc does not play with the selected audio or subtitle language if that audio or subtitle 23_.,27
subtitle language set as the default language is not included on that DVD.
setting,
Picture is not displayed in 4:3 (or 16:9), o Set the "TV ASPECT" defauk setting to the proper setting for the connected TV, 27, 28
Menu screen messages for the desired o Check the default setting for the disc language's menu language. 23, 24
language do not display,
o Check that the batteries are inserted in the proper "(_" and "_" directions, 18
o The batteries are dead, Replace them with new batteries. 18
o Point the remote control unit at the remote control sensor when operating it. 18
o Operate the remote control unit within a distance of 7 meters from the remote control 18
Se[Isor,
o Remove the obstacle between the remote control unit and remote control sensor. 18
Remote control unit does not operate,
63