Connecting To A Digital Recorder; Connecting To A Stereo Components - Denon DVD-3800 Operating Instructions Manual

* Set the "AUDIO SETUP" default setting as shown below. (See page 33.)
l
"DIGITAL OUT" + "PCM"
"LPCM (44.1 kHz/48kHz)" i "ON"
Playing DVDs with incorrect settings may result noise that could damage your ears or the speakers
DVD-3800
Input connector
DVD-3800
/m
Stereo component
NOTES:
l
When connectrng to a Z-channel audio stereo device, set "AUDIO CHANNEL" under "AUDIO SETUP" at "SETUP" to "2
CHANNEL" (see page 301. For multi-channel sources, the signals are down-mixed into two channels (analog).
(Only the front left and rrght channels are output for sources for which down-mixing is prohibited.)
l
Set "LPCM (44.1 kHz/48 kHz)" under "AUDIO SETUP" at "SETUP" to "OFF". (See page 33.)
(If set to "ON", analog audio signals converted to 48 kHz or less will be output for linear PCM or packed PCM sources.)
l
Set "DIGITAL OUTPUT" at "PURE DIRECT MODE" to "OFF". (See page 43.)
(If set to "ON", analog audio signals converted to 96 kHz/88.2 kHz will be output when playing sources recorded at 196 kHz/l76.4 kHz.)
15