When Video Setup Is Selected - Denon DVD-2200 Operating Instructions Manual

3
When "WALL PAPER" is sebcted:
BLUE (Factory defaumt}
Sebct this to display a bhJe background on the TV dJspJay.
GRAY
Select this to dJspb_y a gray background era the TV dJspbay,
BLACK
Sebct this to display a bJack background on the TV display.
PICTURE
Sebct this to display the wallpaper era the TV display,
$ To exit the setup mode
Use the Ir cursor button to sebct "EXIT SETUP", then press the ENTER button, It is abe possible to quit by pressing the SETUP button
on the remote control unit.
lm
®®®©
®®©©
1,2,3 m
®®
C,(E) ® ®
0000
1-- _5©
z-m _ f-m
1
See page 21,
Use the & ahd T cursor buttons to select the desired setting, then press
the ENTER button.
TV ASPECT
Use this to set the shape of your TV's screen.
TV TYPE
Use this to set your TV's video ferreat (NTSC, PAL or MULTI).
VIDEO OUT
Use this to select either the progressive image output or interJace image
output.
STILL MODE
The play DVD video, seJect the desired video reede ("FIELD",
"FRAME", "AUTO").
BLACK LEVEL
're select the black level of the picture, "DARKER" or "LIGHTER".
PROGRESSWE MODE
Select the film source and video source detection method recorded era the
DVD,
NermaJly sebct "MODE 1" (]eve[ detection rhode).
(only vaJid for progressive output during DVD video playback)
Remote control unit
%
Remote control unit
27