Denon DVD-2200 Operating Instructions Manual page 37

(2; When "CAPTIONS" is selected:
OFF (Factory defaumt)
Select this when you do not want to display tile captions on tile screen
when playing DVDs containing English captions
ON
Select this to display tile captions on the screen when playing DVDs
cor/tair/ing English captions,
(s_ When "COMPRESSION" is sebcted:
OFF (Factory defeumt)
Select this for the standard range,
ON
Select this to achieve powerful sound even when tile volume is low,
This setting is suited for watching DVDs late at night with the volume
los/. (This setting is only valid for DVDs recorded in Dolby Digital,)
3
(;1} When "AUTO POWER MODE" is selected:
OFF (Factory defaumt)
Tile power does not automatically switch to the standby mode,
ON
Tile DVD-2200's power turns off and the standby mode is set if the
DVD-2200 remair_s in the slop roode for approximately 30 minutes.
(5; When "SLIDE SHOW" is selected:
Use the a, and _ cursor buttons to set the tiroe interval,
The time ir/terva] ('an be set within 5 and 15 seconds. (Tile factory
default setting is 5 seconds.)
$ To exit the setup mode
Use tile IF cursor button to select "EXIT SETUP", then press the ENTER button, It is also possible to quit by pressing the SETUP button
on the remote control unit.
NOTES:
o An English caption decoder is required to display English captions.
DVDs with caption sigr/a]s are indicated by the D, Q, _ mark.
English captions cannot be displayed when playing DVDs which do not contain caption sigr/ab.
o The characters in which tile captions are displayed (capita] letters, small letters, italics, etc,) depend on the DVD and cannot be selected
with the DVD-2200,
37