Use the number
buttons to input a 4-digit password,
then press the ENTER button,
_ The set's password
is set to "0000"
by defauk,
_ Do not forget
the password.
$ The setting cannot be (:hanged without
inputting the
correct
password.
2; When "PASSWORD" is selected:
Use the _ cursor button to select the "CHANGE",
then press the ENTER button,
Use the nureber buttons to input a old (current) 4-
digit password,
_ The set's password
is set to "0000"
by default.
3
Use the nureber
buttons
to input a new 4-digit
password,
Use the number
buttons
to input a new 4-digit
password
again. (for the confirmation.)
Then press the ENTER button,
$ Do not forget the password.
$ The setting cannot be (:hanged without
inputting
the correct
password,
CDCD©
GCDCD
CD
Remote control unit
%
Remote control unit
©©©
CDCDCD
CD
Remote control unit
%
Remote control unit
:_ To exit the setup
mode
Use the T cursor button to select "EXIT SETUP", then press the ENTER button, It is also possible to quit by pressing the SETUP button
on the remote
control
unit.
35