Safety Instructions; Grounding Or Polarization - Denon DVD-2200 Operating Instructions Manual

SAFETY mNSTRUCTmONS
1. Read instructions - All the safety and operating instructions
should be read before the product is operated.
2. Retain instructions -- The safety and operating instructions
should be retained for future reference.
3. Heed Warnings - All warnings on tile product and in the
operating instructions should be adhered to.
4. Follow instructions - All operating and use instructions should
be followed,
5. Cleaning - Unplug this product from the wall outlet before
cleaning, Do not use liquid cleaners or aerosol cbaners,
6. Attachments - Do not use attachmer/ts not recommer/ded by
the product manufacturer as they may cause hazards,
7. Water and Moisture -- Do not use this product near water - for
example, near a bath tub, wash bowl, kitchen sink, or laundry
tub; in a wet basement; or near a swimming pool; and the like,
8. Accessolies - Do not place this product on an unstable cart,
stand, tripod, bracket, or table. The product may fall, causing
serious iniu_y to a child or adult, and serious damage to the
product. Use only with a cart, stand, tripod, bracket, or table
recommended by the manufacturer, or sold with the product.
Any mour/ting of tile product should follow the manufacturer's
instructions, and should use a
mounting accessory
recommended by the
marlufaoturer,
9. A product and cart
combination should be
moved with care. Quick
stops, excessive force,
and urleven surfaces may
cause the product and cart
combination to overturn.
10, \/entilation - Slots and openings in the cabinet are provided for
ventilation and to ensure reliable operation of the product and to
protect it from overheating, and these openings must not be
blocked or covered, The openings should never be blocked by
placing the product on a bed, sofa, rug, or other similar surface,
TMs product should not be placed in a buib-in installation such
as a bookcase or rack unbss proper ventilation is provided or
the manufacturer's instructions have been adhered to,
11, Power Sources - This product should be operated only from the
type of power source indicated on the marking label, if you are
not sure of tile type of power supply to your home, consult your
product dealer or local power company. For products intended
to operate from battery power, or other sources, refer to the
operating instructions,
12, Grounding or Polarization - This product may be equipped with
a polarized alternating-current line plug (a plug having one blade
wider than the other). This plug will fit into the power outlet only
one way, This is a safety feature, if you are unable to insert the
plug fufly into the outlet, try reversing the plug. if the plug
should still fail to fit, contact your electrician to replace your
obsolete outlet. Do not defeat the safety purpose of the
polarized plug.
FIGURE A
EXAMPLE OF ANTENNA GROUNOING
AS PER NATIONAL
ELECTRICAL CODE
13, Power-Cord Protection - Powepsupply cords should be routed
so that they are not likely to be walked on or pinched by items
placed upon or against them, paying particular attention to
cords at phgs, convenience receptacles, and the point where
they exit flom the product.
15, Outdoor Antenna Grounding -_ if an outside antenna or cable
system is connected to the product, be sure the antenna or
cable system is grounded so as to provide some protection
against voltage surges and buib-up static charges. Article 810 of
the National Electrical Code, ANSI/NFPA 70, provides information
with regard to proper grounding of the mast and supporting
structure, grounding of the lead-in wire to an antenna discharge
unit, size el grounding conductors, location of antenna-
discharge unit, connection to grounding electrodes, and
requirements for the grounding electrode. See Figure A.
16, Lightning - For added protection for this product during a
lightning storm, or when it is left unattended and unused for
long periods of time, unplug it from the waft oudet and
disconnect the antenna or cable system. This will prevent
damage to the product due to lightning and power4ine surges,
17, Power Lines - An outside antenna system should not be
located in the vbinity of overhead power lines or other electric
light or power circuits, or where it can fail into such power lines
or cilcuits, When ir/stalling an outside antenna system, extleme
care should be taken to keep from touching such power lines or
circuits as contact with them might be fatal.
18, Overloading - Do not ovedoad wail outbts, extension cords, or
integral cor/venience receptacbs as this can result in a risk of
fire or electric shock.
19, Object and Liquid Entry - Never push objects of any kind into
this product through openings as they may touch dangerous
voltage points or short-out parts that could result in a fire or
electric shock, Never spill liquid of any kind on the product.
20, Servicing- Do not attempt to service this product yourself as
opening or removing covers may expose you to dangerous
voltage or od_er hazards, Refer all servicing to qualified
service personnel,
21, Damage Requiring Service - Unplug this product from the
wall outlet and refer servicing to qualified service personnel
under the following conditions:
a} When the powep-supply cold or plug is damaged,
b) if liquid has been spilled, or objects have fallen into the
product,
c} if the ploduct has been exposed to lain ol watel,
d) if the ploduct does not operate nolmaily by following tile
operating instructions. Adjust only those controls that are
covered by the operating instructions as an improper
adiustment ol other controls may result in damage and will
often lequile extensive wolk by a qualified technician to
_estore the product to its noH-c_al o peration,
e} if the ploduet has been dlopped or damaged in any way, and
f) When the product exhibits a distinct change in performance
-_ this indicates a need fol service,
22, Replacement Parts -- When replacement parts are required, be
sure the service technician has used replacement parts
specified by the manufacturer or have the same characteristics
as the original part. Unauthonzed substitutions may result in
fire, electric shock, or od_er hazards,
23, Safety Check - Upon completion of any service or repahs to this
product, ask the service technician to perform safety checks to
determine that the product is in proper operating condition.
24, WaN or Ceiling Mounting - The product should be mounted to a
wall or ceiling only as recommended by the manufacturer.
25, Heat - The product should be situated away from heat sources
such as radiators, heat registers, stoves, or other products
(including amplifiers) that produce heat.