Digital Connection To A Recording Device (Md Recorder, Etc.); Connecting The Power Supply Cord - Denon DVD-3930CI Operating Instructions Manual

Connections
NOTE:
• The audio signals of the multi and stereo areas of Super Audio CDs are not HDMI output.
• DVD-Audio discs that are copyright protected by CPPM can only be played on devices that are
mutually compatible with HDMI Ver. 1.1. (The DVD-3930CI is compatible with HDMI Ver. 1.1.)
• Some HDMI compatible devices can be used to control other devices via the HDMI terminal, but the
DVD-3930CI cannot be controlled via the HDMI terminal by other devices.
• The audio signals from the HDMI terminal (sampling frequency, bit length, etc.) may be restricted by
the connected device.
• Set the DVD-3930CI's resolution according to the resolutions with which the connected TV or
monitor are compatible.
• Use a cable including the HDMI logo (HDMI certified product) for connection of the HDMI terminal.
Normal playback may not be possible if a cable that does not include the HDMI logo (non-HDMI-
certified product) is used.
¢ Copyright protection system
In order to play the digital video and audio signals of DVD-Video and DVD-Audio discs using HDMI
connections, both the player and the TV, AV amplifier, etc., must be compatible with a copyright protection
system called "HDCP" (High-bandwidth Digital Content Protection system). HDCP is a copyright
protection technology consisting of data encrypting and authentication of the connected device.
The DVD-3930CI is HDCP compatible.
When a device that is not compatible with HDCP is connected, video signals will not be output normally.
For information on your TV, AV amplifier, etc., refer to its operating instructions.

Digital connection to a recording device (MD recorder, etc.)

At "AUDIO SETUP", set "DIGITAL OUTPUT" to "PCM" (
( page 23).
Playing a DVD without first making the correct settings could result in noise that is unpleasant on the ears
and could damage the speakers.

Connecting the power supply cord

NOTE:
• Insert the plugs securely. Incomplete connections will result in the generation of noise.
12
ENGLISH
ENGLISH
Connections
page 23), "DOWN SAMPLING" to "ON"
MD recorder
C
COAXIAL
IN
or
D
OPTICAL
IN
AC outlet
AC 120 V, 60 Hz
Power supply cord
(Included)