Table of Contents
Advertisement
REMOTE CONTROL
UNIT
m The DV[}/_2200 can be controlled
from a distance
using the included
remo'te control
unit (RC@62).
i}
Rer_ove the remote
control unit's rear cover.
(_} PLace two R6P/AA batteries
in the battery
compartment
in the
direction
indicaled
by the marks,
"_) Close the rear eover,
Cautions
On Batter}es
o Use R6P/AA b_stteries in this remote control
unit.
• Replace the batteries
with new ones approximately
orlce a
year, though this deper_ds on the frequency
with which the
remote
cor_trol unit is used,
o if the rernote control unit does Rot operate from dose to the
main unit, replace the batteries with new ones, even if less
than a year has passed.
, The included
battery
is onty for verifying
operatiotL
Replace it with a new battery
as soon as possible.
When
inserting
the batteries,
be careful
to do so in the
proper direction, following
the (B and (_ marks in the remote
control unit's battery
compartment.
Ib prevent
damage or batlery
fluid leakage:
• Do not use a new battery
with an old one,
• Do not use two differe_t
types of batteries.
• Do not short-circuit,
d(sassemble,
hea_ or dispose
of
batteries
in flames,
o Remove the batleries
when Rot p(anning to use the remote
control
unit for a long period
of time.
o If the batteries shoold leak, carefully wipe off the fluid from
the inside of the battery
eornpartmer_t,
then insert
new
batteries,
When operating
the rernote eo_/trel unit, point it at the
remote
control
sensor as shown
on the diagram.
The remote
control
unit can be used from
a direct
distance of approximately
7 meters. This distance will be
sbortec
however,
if there are obstacles
in the way or if
the remote
control
unit is not pointed
directly
at the
remote
control
sensor.
The remote control
unit can be operated
at a horizontal
angle of up to 30 ° with respect
to the remote
control
sensor.
NOTES:
It may be difficult to operate the remote control unit if the reraote control sensor is exposed to direct sunlight or strong artificial light.
Do not press buttons
on the main unit and on the remote
eorltrol
unit at the same time. Doing so will result it/maif_Jnction,
18
Hide quick links:
Advertisement
Table of Contents
