Hdmi Input; Component (Component Video Input) - Onkyo HT-R758 Instruction Manual

_j uo
If you connect a video component to an HDMI input, you
must assign that input to an input selector. For example, if
you connect your Blu-ray Disc/DVD player to NDMI iN 2,
you must assign "HDMI2" to the "BD/DVD" input
selector.
Here are the default assignments.
BD/DVD
CBL/SAT
GAME
PC
AUX
TV/CD
HDMII
HDMI2
HDMI3
HDMI4
m BD/DVD, CBL/SAT, GAME, PC, AUX, TV/CD
HDMI1, HDMI2, HDMI3, HDMI4, HDMI5,
HDMI6:
Select the input to which the component has been
connected.
} ..... :
Select if you're not using the NDMI OUT.
Each HDMI input cannot be assigned to two input
selectors or more. When HDMI1 - HDMI6 have already
been assigned, you must first set any unused input
selectors to "- .... " or you will be unable to assign
HDMI1 - HDMI6 to other input selectors.
• If no video component is connected to HDM[ output (even if the
HDM[ input is assigned), the AV receiver selects the video
source based on the setting of "Component (Component Video
[nput)".
• When an HDMI IN is assigned to an input selector as explained
here, the same HDMI IN will be set as a priority in the "Digital
Audio" (_ page 48). In this case, if you want to use the coaxial
or optical audio input, make the appropriate selection in the
"Audio Selector" setting (_ page 50).
• Do not assign an HDMI IN to the TV/CD selector while "HDMI
Ctrl (RIHD)" is set to "On" (_ page 52), otherwise
appropriate CEC (Consumer Electronics Control) operation will
not be guaranteed.
• [f you assign % .... " to an input selector that is currently
selected in "HDMI Through" (_ page 52), the "HDMI
Through" setting will be automatically switched to "Off'.
Advanced Operations
3 _ 4 5 _>_
If you connect a video component to a component video
input, you must assign that input to an input selector. For
example, if you connect your Blu-ray Disc/DVD player to
COMPONENT VIDEO IN 2, you must assign "IN2" to
the "BD/DVD" input selector.
Here are the default assignments.
BD/DVD
CBL/SAT
GAME
PC
AUX
TV/CD
INI
IN2
BD/DVD, CBL/SAT, GAME, PC, AUX, TV/CD
IN1, IN2:
Select the input to which the component has been
connected.
..... :
Select if you're not using the COMPONENT
VIDEO OUT.
En-45
©©