Hdmi Input - Onkyo TX-NR709 Instruction Manual

HDMI Input

If you connect a video component to an HDMI input, you
must assign that input to an input selector. For example, if
you connect your Blu-ray Disc/DVD player to HDMI
IN 2, you must assign "HDMI2" to the "BD/DVD" input
selector.
If you've connected your TV to the AV receiver with an
HDMI cable, composite video, S-video and component
video sources can be upconverted
HDMI output. You can set this for each input selector by
selecting the "- - - - -" option. See "Video Connection
Formats" for more information on video signal flow and
upconversion (➔ page 83).
Composite video, S-Video,
component video
OUT
Composite video, S-Video,
component video
Here are the default assignments.
Input selector
BD/DVD
VCR/DVR
CBL/SAT
GAME
PC
AUX
TV/CD
PHONO
PORT
■
BD/DVD, VCR/DVR, CBL/SAT, GAME, PC,
TV/CD, PHONO, PORT
HDMI1, HDMI2, HDMI3, HDMI4, HDMI5,
HDMI6, HDMI7:
Select a corresponding HDMI input to which the
video component has been connected.
- - - - -:
Output composite video, S-Video, and component
video sources from the HDMI output. The video
output signal from the HDMI output is the one
configured in "Component Video Input".
*1 If you connect your personal computer to PC IN (Analog
RGB), you must assign "- - - - -" to the "PC" input selector.
Each HDMI input cannot be assigned to two input
selectors or more. When HDMI1 - HDMI7 have already
been assigned, you must first set any unused input
selectors to "- - - - -" or you will be unable to assign
HDMI1 - HDMI7 to other input selectors.
*
and output by the
HDMI
IN
HDMI
Default assignment
HDMI1
HDMI2
HDMI3
HDMI4
*1
HDMI5
FRONT (Fixed)
- - - - -
- - - - -
- - - - -
Note
• If no video component is connected to HDMI output (even if the
HDMI input is assigned), the AV receiver selects the video
source based on the setting of "Component Video Input".
• When an HDMI IN is assigned to an input selector as explained
here, the same HDMI IN will be set as a priority in the "Digital
Audio Input" (➔ page 46). In this case, if you want to use the
coaxial or optical audio input, make the appropriate selection in
the "Audio Selector" setting
• The "TUNER" selector cannot be assigned and is fixed to the
"- - - - -" option.
• "AUX" is used only for input from the front panel.
• Do not assign an HDMI IN to the TV/CD selector while "HDMI
Control(RIHD)" is set to "On"
appropriate CEC (Consumer Electronics Control) operation will
not be guaranteed.
• If you assign "- - - - -" to an input selector that is currently
selected in "HDMI Through"
Through" setting will be automatically switched to "Off".
• If you connect a component (such as UP-A1 Dock with docked
iPod/iPhone) to the UNIVERSAL PORT jack, you cannot
assign any input to the "PORT" selector.
Component Video Input
If you connect a video component to a component video
input, you must assign that input to an input selector. For
example, if you connect your Blu-ray Disc/DVD player to
COMPONENT VIDEO IN 2, you must assign "IN2" to
the "BD/DVD" input selector.
Here are the default assignments.
Input selector
BD/DVD
VCR/DVR
CBL/SAT
GAME
PC
TV/CD
PHONO
PORT
■
BD/DVD, VCR/DVR, CBL/SAT, GAME, PC,
TV/CD, PHONO, PORT
IN1, IN2:
Select a corresponding component video input to
which the video component has been connected.
- - - - -:
Output composite video and S-Video sources from
the HDMI output.
Note
• If you connect a component (such as UP-A1 Dock with docked
iPod/iPhone) to the UNIVERSAL PORT jack, you cannot
assign any input to the "PORT" selector.
• The "AUX" selector is fixed to the "- - - - -" option.
• The "TUNER" selector cannot be assigned and is fixed to the
"- - - - -" option.
(➔ page 55).
(➔ page 58), otherwise
(➔ page 58), the "HDMI
Default assignment
IN1
- - - - -
IN2
- - - - -
- - - - -
- - - - -
- - - - -
- - - - -
En
45