Hdmi Input - Onkyo TX-NR525 Owner's Manual

Menu item Setting target
11. Network MAC Address
Setup
DHCP [IP Address, Subnet Mask,
(➔ page 54)
Gateway, DNS Server]
Proxy URL [Proxy Port]
Network Standby
Update Notice
Explanatory Notes
4. Sp Config (Speaker Configuration)
■
Subwoofer
Yes
No
Menu selection
Setting target
Setting options (default setting underlined)
Setup

1. HDMI Input

2. Component
3. Digital Audio
4. Sp Config
5. Sp Distance
6. Level Cal
7. Audio Adjust
8. Source Setup
Setting target
9. Hardware
10. HDMI Setup
11. Network Setup
Menu
1. HDMI Input
If you connect a video component to an HDMI input,
you must assign that input to an input selector. For
example, if you connect your Blu-ray Disc/DVD player
to HDMI IN 2, you must assign "HDMI2" to the
"BD/DVD" input selector.
Here are the default assignments.
Input selector
BD/DVD
CBL/SAT
GAME
PC
AUX
TV/CD
■
BD/DVD, CBL/SAT, GAME, PC, AUX, TV/CD
HDMI1, HDMI2, HDMI3, HDMI4, HDMI5, HDMI6:
Select the input to which the component has
been connected.
- - - - -:
Select if you're not using the HDMI OUT.
Each HDMI input cannot be assigned to two input
BD/DVD
selectors or more. When HDMI1 - HDMI6 have
CBL/SAT
already been assigned, you must first set any
GAME
PC unused input selectors to "- - - - -" or you will be
AUX
unable to assign HDMI1 - HDMI6 to other input
TV/CD
selectors.
Note
• If no video component is connected to the HDMI input (even
if the HDMI input is assigned), the AV receiver selects the
video source based on the setting of "2. Component
(Component Video Input)".
• When an HDMI IN is assigned to an input selector as
explained here, the same HDMI IN will be set as a priority
in the "3. Digital Audio (Digital Audio Input)"
this case, if you want to use the coaxial or optical audio
input, make the appropriate selection in the "Audio
Selector" setting
Default assignment
HDMI1
HDMI2
HDMI3
HDMI4
- - - - -
- - - - -
(➔ page 46). In
(➔ page 51).
En-45
Advanced Operations
• Do not assign an HDMI IN to the TV/CD selector while
"HDMI CEC (RIHD)" is set to "On" (➔ page
appropriate CEC (Consumer Electronics Control) operation
will not be guaranteed.
• If you assign "- - - - -" to an input selector that is currently
selected in "HDMI Through" (➔ page
Through" setting will be automatically switched to "Off".
Operating
procedure
(➔ page 44)
52), otherwise
53), the "HDMI