Connecting The Av Receiver; Connecting The Speakers; Speaker Configuration; Attaching The Speaker Cable Labels - Onkyo HT-R758 Instruction Manual

Connecting the AV
Receiver
Connecting the Speaker Cables
The following illustration shows how to connect the
speakers to each pair of terminals.
m Screw-type speaker terminals
Strip 112"to 5/8" (12 to 15 mm) of insulation from the ends
of the speaker cables, and twist the bare wires tightly, as
shown.
E_1/2" to 5/8"_(12_to15 _'_l_mm) g_2,_ll _ _=
m Banana Plugs (North American models)
• If you are using banana plugs, tighten the speaker
terminal before inserting the banana plug.
• Do not insert the speaker code directly into the center
hole of the speaker terminal.
Surround
rl i
ht
Surround
left
SURROUND FRONT
Front right Front left
En-12 V
Center
Connections
Speaker Configuration
The following table indicates the channels you should use
depending on the number of speakers that you have.
No matter how many speakers you use, a powered
subwoofer is recommended for a really powerful and solid
bass.
To get the best from your surround sound system, you need
to set the speaker settings automatically (_ page 30) or
manually (_ page 46).
Attaching the Speaker Cable Labels
The speaker terminals are color-coded for identification
purpose.
Front left
Front right
Center
Surround left
Surround right
White
Red
Green
Blue
Gray
The supplied speaker cable labels are also color-coded and
you should attach them to the positive (+) side of each
speaker cable in accordance with the table above. Then all
you need to do is to match the color of each label to the
corresponding speaker terminal.
• With the Home Theater System, speaker cable labels are not
supplied.
©©