Zone 2 Troubles; Music Server And Internet Radio Troubles; Usb Device Playback Troubles; The Display Doesn't Work - Onkyo HT-R758 Instruction Manual

m There's no video
Make sure that your iPod/iPhone model's TV OUT
settiug is set to Ou.
Some versions of the iPod/iPhone do not output
video.
N The AV receiver's remote controller doesn't
control my iPod/iPhone
Make sure your iPod/iPhone is properly inserted in
the Dock. If your iPod/iPhone is ill a case, it may not
connect properly to the Dock. Always remove your
iPod/iPhone fi'om the case before inserting it into the
Dock.
Make sure you' ve selected the right remote mode. 57
If you still can't control your iPod/iPhone, start
playback by pressing your iPod/iPhoue model's Play
buttou. Remote operatiou should theu be possible.
Depeudiug on your iPod/iPhoue, some buttons may --
not work as expected.
N The AV receiver unexpectedly selects my
iPod/iPhone as the input source
Always pause iPod/iPhoue playback before selecting --
a different input source. If playback is not paused, the
Direct Change function may select your iPod/iPhone
as the input source by mistake during the transition
between tracks.
N iPod/iPhone doesn't work properly
Try reconnecting your iPod/iPhoue.
N There's no sound
Only compoueuts connected to analog inputs can be --
played in Zone 2.
N Can't access the server or Internet radio
Check the network couuectiou between the AV 75
receiver aud your router or switch.
Make sure the server is up aud ruuuiug and
compatible with the AV receiver.
76
N Playback stops while listening to music files on
the server
Make sure your server is compatible with the AV
receiver.
76
N
If the server is serving large music files to several
networked devices simultaneously, the network may
become overloaded and playback may be interrupted.
Reduce the number of playback devices on the
network, upgrade your network, or use a switch
instead of a hub.
Can't connect to the AV receiver from a Web
browser
ff you're using DHCP, your router may not always
allocate the same [P address to the AV receiver, so if
you find that you can't connect to a server or [uteruet
radio station, recheck the AV receiver's [P address on
the "Network Setup" screen.
54
Appendix
N Can't access the music files on a USB device
Make sure the USB device is plugged iu properly. --
USB memory devices with security functions cannot --
be played.
N Standby power consumption
[u the following cases, the power consumption in
standby mode may reach up to a maximum of 4.2 W:
- The "HDMI Ctrl (RIHD)" setting is set to "On".
(Depending on the TV status, the AV receiver will
enter standby mode as usual.)
- The "HDMI Through" setting is set to other than
"Off'.
- The "Network Standby" setting is set to "On".
52,54
NThe sound changes whenlconnect my
headphones
When a pair of headphones is connected, the listening --
mode is set to Stereo, unless it's already set to Stereo,
Mouo, Direct, or Pure Audio (European and
Australian models).
N The speaker distance cannot be set as required
The values entered may be automatically adjusted --
with values best-suited for your home theater.
N The display doesn't work
The display is turued off when the Pure Audio
(European and Australian models) listening mode
is selected.
En-65 V
©©