Video Troubles; Tuner Troubles; Remote Controller Troubles; Ri Dock For Ipod/Iphone Troubles - Onkyo HT-R758 Instruction Manual

m There's no picture
Make sure that all video couuectiug plugs are pushed 14
ill all the way.
ff the video source is connected to a component video 16, 45
input, you must assign that input to all input selector,
and your TV must be connected to COMPONENT
VIDEO OUT.
If the video source is connected to all HDM[ input, 15, 45
you must assign that input to all input selector, and
your TV must be conuected to HDMI OUT.
On your TV, make sure that the video input to which --
the AV receiver is connected is selected.
N Reception is noisy, FM stereo reception is noisy,
or the FM STEREO indicator doesn't light
Relocate your auteuua.
Listeu to the statiou iu mouo. 27
Passiug cars aud airplaues cau cause iuterfereuce.
If nothing improves the reception, install an outdoor --
autelma.
q
N The remote controller doesn't work
Before operating this unit, be stare to press
RECEIVER.
Appendix
Make sure you've entered the correct remote control 58
code.
N Can't control other components
[f it's an Oukyo compoueut, make sure that the RI
cable and analog audio cable are connected properly.
Connecting only an 1"-41cable won't be enough.
17
If you've connected an cassette tape deck to the
TWCD IN jack, or an R[ Dock to the TWCD IN or
GAME IN jacks, for the remote controller to work
properly, you must set the input display
appropriately.
4O
To control another manufacturer's component, point 58
the remote coutroller at that compoueut.
N There's no picture from a source connected to
an HDMI IN
Reliable operatiou with an HDMI-to-DVI adapter is 74
not guaranteed. In addition, video signals from a PC
are not guaranteed.
N The on-screen menus don't appear
On your TV, make sure that the video input to which --
the AV receiver is couuected is selected.
Install new batteries. Dou't mix different types of
batteries, or old aud uew batteries.
Make stare that the AV receiver is not subjected to
direct sunshine or inverter-type fluorescent lights.
Relocate if uecessary.
Make stare you've selected the correct remote 11, 59
coutroller mode.
To control an Oukyo component that's not connected 59
via 1"-4 I, point the remote controller at the component.
Be sure to enter the appropriate remote control code
first.
D_ • o _o_ _ • -_
N There's no sound
Make sure your iPod/iPhoue is actually playiug.
Make sure the AV receiver is turned on, the correct
iuput source is selected, aud the volume is turued up.
En-64
Try resetting your iPod/iPhoue.