Table of Contents
Advertisement
About Audyssey Dynamic EQ®
Audyssey Dynamic EQ solves the problem of
deteriorating sound quality as volume is decreased by
taking into account human perception and room
acoustics. Dynamic EQ selects the correct frequency
response and surround levels moment-by-moment at any
user-selected volume setting. The result is bass response,
tonal balance, and surround impression that remain
constant despite changes in volume. Dynamic EQ
combines information from incoming source levels with
actual output sound levels in the room, a prerequisite for
delivering a loudness correction solution.
Audyssey Dynamic EQ works well by itself. However, if
Audyssey 2EQ® is on, the two technologies work in
tandem to provide well-balanced sound for every listener
at any volume level.
About Audyssey Dynamic Volume®
Audyssey Dynamic Volume solves the problem of large
variations in volume level between television programs,
commercials, and between the soft and loud passages of
movies. Dynamic Volume looks at the preferred volume
setting by the user and then monitors how the volume of
program material is being perceived by listeners in real
time to decide whether an adjustment is needed.
Whenever necessary, Dynamic Volume makes the
necessary rapid or gradual adjustments to maintain the
desired playback volume level while optimizing the
dynamic range. Audyssey Dynamic EQ is integrated into
Dynamic Volume so that as the playback volume is
adjusted automatically, the perceived bass response,
tonal balance, surround impression and dialog clarity
remain the same whether watching movies, flipping
between television channels or changing from stereo to
surround sound content.
A/V Sync
@ A/V Sync
0 msec to 400 msec
in 10 msec steps.
When using progressive
scanning
on your Blu-ray
Disc/DVD
player, you may find that the picture and sound
are out of sync. With this setting, you can correct
this by
delaying
the audio signals.
To view the TV picture while setting the delay, press
ENTER.
To return to the previous
screen,
press RETURN.
The range of values you can adjust will depend on whether
your TV or display supports HDMI Lip Sync and if the
"LipSync" setting is set to "On" or not (_ page
53).
{Not_
• A/V Sync is disabled when the Pure Audio (European and
Australian models) or Direct listening mode is used with all
analog input source.
• This setting cannot be used with the NET input selector.
Preset Name For Input Selector
@ Name
- - -, Blu-ray,
DVD, HD DVD, VCR,
DVR, Tivo,
CableSTB,
SAT STB, PS3, Wii, Xbox,
PC, TV, CD,
TAPE,
iPod:
To reset to the default, select "- - -".
You can enter a preset name for each individual
input
selector
for easy identification.
When entered,
the preset
name will be displayed.
• You can't assign the same preset name to multiple input selectors.
• This setting cannot be used for the AM, FM, NET or USB input
selectors.
Audio Selector
Advanced
Operations
@ Audio
Selector
ARC:
The audio signal from your TV tuner can be sent to
NDMI OUT of the AV receiver21
With this selection,
the TV's
audio can be
automatically
selected
as a priority among
other
assignments.
HDMI:
This can be selected
when NDMI IN has been
assigned
as an input source. If both HDMI
(HDMI
IN) and digital audio
inputs (COAXIAL
IN or
OPTICAL
IN) have been assigned,
HDMI
input is
automatically
selected
as a priority.
COAXIAL:
This can be selected
when COAXIAL
IN has been
assigned
as an input source. If both coaxial
and
HDMI
inputs have been assigned,
coaxial
input is
automatically
selected
as a priority.
}'OPTICAL:
This can be selected
when OPTICAL
IN has been
assigned
as an input source. If both optical
and HDMI
inputs have been assigned,
optical input is
automatically
selected
as a priority.
ANALOG:
The AV receiver
always
outputs
analog
signals.
You can set priorities
of audio output when there are both
digital and analog inputs.
• This setting can be made only for an input source that is assigned
to HDMI IN, COAXIAL
IN, or OPTICAL IN.
"1 You can select "ARC" if you select the TV/CD input selector.
But you cannot if you've selected "Off" in the "Audio Return
Ch" setting (3 page
53).
En-50
©©
- Quick Links:
- Features
Hide quick links:
Advertisement
Table of Contents
