Hdmi Input; Component (Component Video Input); Digital Audio (Digital Audio Input) - Onkyo HT-R380 Instruction Manual

Explanatory Notes
Menu
Subwoofer
Yes:
Select if a subwoofer is connected.
No:
Select if no subwoofer is connected.
Menu selection
Setting target
Setting options (default setting underlined)

HDMI Input

Menu HDMI Input
If you connect a video component to an HDMI input, you
must assign that input to an input selector. For example, if
you connect your Blu-ray Disc/DVD player to HDMI
IN 2, you must assign "HDMI2" to the "BD/DVD" input
selector.
Here are the default assignments.
Input selector
BD/DVD
VCR/DVR
CBL/SAT
GAME
AUX
TV/CD
PORT
■
BD/DVD, VCR/DVR, CBL/SAT, GAME, AUX, TV/
CD, PORT
HDMI1, HDMI2, HDMI3:
Select a corresponding HDMI input that the video
component has been connected.
- - - - -:
Select if you're not using the HDMI OUT.
Each HDMI input cannot be assigned to two input
selectors or more. When HDMI1 - HDMI3 have
already been assigned, you must set first any unused
input selectors to "- - - - -", or you will be unable to
assign HDMI1 - HDMI3 to input selector.
Note
• When an HDMI IN is assigned to an input selector as explained
here, the digital audio input for that input selector is automati-
cally set to the same HDMI IN
Audio Input)).
• If you connect a component (such as UP-A1 Dock that seated
iPod) to UNIVERSAL PORT jack, you cannot assign any input
to PORT selector.
• Do not assign the component connected with the HDMI input to
TV/CD selector when you set "TV Control" setting to "On"
(➔ 34). Otherwise, appropriate CEC (Consumer Electronics
Control) operation will not be guaranteed.
Sp Config
Default assignment
HDMI1
- - - - -
HDMI2
HDMI3
- - - - -
- - - - -
- - - - -
(➔ 29, Digital Audio (Digital

Component (Component Video Input)

Menu Component
If you connect a video component to a component video
input, you must assign that input to an input selector. For
example, if you connect your Blu-ray Disc/DVD player to
COMPONENT VIDEO IN 2, you must assign "IN2" to
the "BD/DVD" input selector.
Here are the default assignments.
Input selector
BD/DVD
VCR/DVR
CBL/SAT
GAME
AUX
TV/CD
PORT
■
BD/DVD, VCR/DVR, CBL/SAT, GAME, AUX, TV/
CD, PORT
IN1, IN2:
Select a corresponding component video input that
the video component has been connected.
- - - - -:
Select if you're not using the COMPONENT
VIDEO OUT.
Note
• If you connect a component (such as UP-A1 Dock that seated
iPod) to the UNIVERSAL PORT jack, you cannot assign any
input to PORT selector.

Digital Audio (Digital Audio Input)

Menu Digital Audio
If you connect a component to a digital audio input, you
must assign that input to an input selector. For example, if
you connect your CD player to the OPTICAL IN 1, you
must assign "OPT1" to the "TV/CD" input selector.
Here are the default assignments.
Input selector
BD/DVD
VCR/DVR
CBL/SAT
GAME
AUX
TV/CD
PORT
■
BD/DVD, VCR/DVR, CBL/SAT, GAME, AUX, TV/
CD, PORT
COAX, OPT1, OPT2:
Select a corresponding digital audio input that the
component has been connected.
- - - - -:
Select if the component is connected to an analog
audio input.
Default assignment
IN1
- - - - -
IN2
- - - - -
- - - - -
- - - - -
- - - - -
Default assignment
COAX
- - - - -
- - - - -
OPT1
- - - - -
OPT2
- - - - -
En
29