Changing The Input Display; Using The Music Optimizer; Muting The Av Receiver; Using Headphones - Onkyo HT-R758 Instruction Manual

When you connect an R l-capable Onkyo component, you
must configure the input display so that [41 can work
properly.
This setting can be done only from the front panel.
1
Press TV/CD or GAME.
"TV/CD" or "GAME" appears on the AV receiver's
display.
2 Press and hold down the same button (about
3 seconds) to change the input display.
Repeat this step to select the desired input display.
N TV/CD: TV/CD -_ DOCK
"h TAPE +_l
N GAME: GAME _-_ DOCK
• "DOCK" can be selected for the "TV/CD" or "GAME"
input selector, but not at the same time.
• Enter the appropriate remote control code before using the
remote controller for the first time (3 page 59).
The Music Optimizer function enhances the sound quality
of compressed music files.
1
(North American models) Press MUSIC
OPTIMIZER on the front panel.
The M.Opt indicator lights on the AV receiver's
display.
The MUSIC OPTIMIZER indicator lights on the
front panel.
• Alternatively, you call use O SETUP on the remote
controller.
• See "Music Optimizer" for more details (3 page
4a).
You can temporarily mute the output of the AV receiver.
1
Press
RECEIVER
followed
by MUTING.
The output is muted and the MUTING indicator
flashes on the AV receiver's display.
Turning On & Basic Operations
1
Connect a pair of stereo headphones with a
standard plug (1/4 inch or 6.3 mm) to the PHONES
jack.
While the headphones plug is inserted in the PHONES
jack, g% indicator lights.
• Always turn down the volume before connecting your
headphones.
• While the headphones plug is inserted in the PHONES
jack, the speakers are turned off.
• When you connect a pair of headphones, the listening mode
is set to Stereo, unless it's already set to Stereo, Mouo,
Direct, or Pure Audio (European and Australian modds).
• If you connect an iPod or iPhoue to the USB port on the AV
receiver, no sound will be output from the headphones jack.
• To uumute, press MUTING again or adjust the volume.
• Muting is automatically cancelled when the AV receiver is
set to standby.
En-40
©©