Using The Rubber Stoppers For A More Stable Platform; Using The Floor Pads For Subwoofer; Wall Mounting; Setting The Subwoofer Level - Onkyo HT-R758 Instruction Manual

Using the Floor Pads for Subwoofer Wall Mounting
Using the Rubber Stoppers for a More Stable
Platform
We recommend using the supplied rubber stoppers to
achieve the best possible sound from your speakers. The
rubber stoppers prevent the speakers from moving,
providing a more stable platform.
_ 0....-- / Rubber stoppers
Bottom of the
SKF-680/SKR-680
j. Rubber stoppers
o _,>---
SKC-680
If the subwoofer is placed on a hard floor (wood, vinyl,
tile, etc.) and playback is very loud, the subwoofer's feet
may damage the flooring. To prevent this, place the
supplied pads underneath the subwoofer's feet. The pads
also provide a stable base for the subwoofer.
Pad
Setting the Subwoofer Level
To set the level of the subwoofer, use the
OUTPUT LEVEL control. Set it so that bass
sounds are evenly balanced with the treble sounds ;'_T,_,LE$g
from the other speakers. Because our ears are less
sensitive to very low bass sounds, there's a temptation to
set the level of the subwoofer too high. As a rule of thumb,
set the subwoofer level to what you think is the optimal
level, and then back it off slightly.
To mount the front/surround speakers vertically, use the
keyhole slot shown to hang each speaker on a screw that's
securely screwed into the wall.
SKF-680/SKR-680
_ Keyhole slots for
wall mounting
... Rubber stoppers
To mount the center speaker horizontally, use the two
keyhole slots shown to hang the speaker on two screws that
are securely screwed into the wall.
Keyhole slots for wall mounting
..... S KC-680
Rubber stoppers
8-1/4" (210 mm)
• If the center speaker is tilted, loosen the screw on the declined
side to move upward so that the speaker could be adjusted
vertically.
En-2 V