Using Access Point Mode
To use Access Point (infrastructure) mode, first adjust your projector
and wireless access point or AirPort base station settings as described
in this section.
Configuring the Projector
1. Press the
button, then choose
Menu
2. Choose
Network Configuration
3. Choose
Wireless LAN
You see this screen:
4. Make sure
Advanced
not, use the
pointer button on the remote control to highlight
, then press
Advanced
5. If your network is using 802.11a, use the
the remote control to highlight
select it.
6. To enable your computer to find the projector on the network,
you need to enter the SSID name of your access point or AirPort
network in the
ESSID
Network
and press
Enter
and press
.
Enter
is selected for the Connection mode. If
to select it.
Enter
pointer button on
, then press
802.11a
text box. (The name of your AirPort
and press
.
Enter
.
to
Enter
Presenting Through a Wireless Network
65