Epson PowerLite 1815p User Manual page 115

The autorun setting means that the scenario will start playing
whenever the projector is turned on (with the drive connected to
the projector).
7. Do one of the following:
If you don't want the scenario to run automatically, click
■
. Skip to step 11 to remove the drive and insert it in
Cancel
the projector.
■ If you want it to run automatically, click
with the following instructions.
You see the Edit Autorun window:
8. To set a scenario to run automatically, select it from the list on the
left side of the screen and use the
the list on the right.
9. Click the box if you want your scenario to repeat
Revive
continuously. Clear the checkbox if you want it to play only once.
10. When done, click
11. Disconnect the USB device or card reader, or remove the
CompactFlash card. See your computer's documentation if you
need instructions. If you're using Windows XP, 2000 or Me, you
may first need to click an icon to stop or disconnect the drive
arrow button to move it to
.
OK
Presenting from a USB Drive, Camera, or CompactFlash Card
and continue
OK
.
note
If more than one scenario is
set to run automatically,
they will play in the order
listed on this screen.
115