Presenting Through a Wireless Network
86
Connecting in Advanced Connection Mode
1. Click
Manual search
2. Enter the IP address or the projector name for the projector you
want to connect to, and click
The Projector is added to the EMP NS Connection screen.
If the search fails to find a projector with the specified IP address,
the searching icon turns into a question mark. If this happens, run
EasyMP on your projector (see page 56) to check the projector's
IP address, then repeat this step.
3. Click the projector you want to connect to and click the
button. If more than one projector is listed, you can select
additional projectors and connect to them at the same time.
on the NS Connection screen.
.
OK
Connect