Resetting The Lamp Timer; Checking Lamp Usage - Epson PowerLite 1815p User Manual

Resetting the Lamp Timer

After you replace the lamp, you need to reset the lamp timer using the
projector's menus.
1. Press the button on the remote control or on the
Menu
projector's control panel. You see the main menu.
2. Use the pointer button on the remote control (or the arrow
buttons on the projector) to highlight
You see this screen:
3. Select
Reset Lamp Hours
4. When you see the prompt, select
5. When you're finished, press

Checking Lamp Usage

To check the number of hours the lamp has been used, press the
button and highlight the
Menu
, then press
Reset
and press .
Enter
press
Yes and Enter
to exit the menu system.
Menu
menu. You see a screen like this:
Info
.
Enter
.
note
The information displayed
depends on the input signal
currently selected.
Maintaining the Projector
159