Using The Direct Power On Function - Epson PowerLite 1815p User Manual

3. Press the P
Power
projector.
The projector beeps once and the
projector warms up, then an image begins to appear. When the
light stops flashing and remains green, the projector is
Power
ready for use.
4. If you are prompted to enter a password, see page 129.

Using the Direct Power On Function

The Direct Power On function enables faster setup. The projector
starts up automatically when you plug it in or turn it on with a wall
switch. You don't have to press the P
Follow these steps to enable Direct Power On:
1. Press the button on the remote control or projector and
Menu
select the
Extended
2. Choose
Operation
3. Choose
Direct Power On
4. Highlight and press
On
5. Press to exit. The setting will take effect the next time you
Menu
plug in the projector.
button on the remote control or on top of the
light flashes green as the
Power
button.
Power
menu.
and press .
Enter
and press
Enter
.
Enter
.
Displaying and Adjusting the Image
warning
Never look into the lens
when the lamp is on. This
can damage your eyes, and is
especially dangerous for
children.
note
If a power outage occurs
when Direct Power On is
enabled and the projector is
plugged in, the projector will
start when the power is
restored.
19