Using Access Point Mode - Epson EB G5200WNL User Manual

Using Access Point Mode

To use Access Point (infrastructure) mode, first adjust your projector
and wireless access point or AirPort base station settings as described
in this section.
Configuring the Projector
1. Press the button, then choose
Menu
2. Choose
Network Configuration
3. Choose
Wireless LAN
4. Make sure
Advanced
not, use the pointer button on the remote control to highlight
, then press
Advanced
5. If your network is using 802.11a, use the
the remote control to highlight
select it.
6. To enable your computer to find the projector on the network,
you need to enter the SSID name of your access point or AirPort
network in the
SSID
network may be different from that of your AirPort base station;
select your base station in the AirPort Admin utility and click
to check the name of your network.)
Configure
Network
and press
and press . You see this screen:
Enter
is selected for the Connection mode. If
to select it.
Enter
, then press
802.11a
text box. (The name of your AirPort
Preparing the Projector to Present Through a Network
and press .
Enter
.
Enter
pointer button on
to
Enter
note
If you are using a
WPS-compatible access
point, see page 79 for
connection information.
69