Epson PowerLite 1815p User Manual page 64

note:
If you don't need the other
network port configurations,
disable them by deselecting
their checkboxes.
When you connect in Ad
Hoc mode, your connection
to other wireless networks or
devices is broken. If you need
to remain connected to your
wireless network, use Access
Point mode, as described on
page 65. Also, make sure
you reconnect to your
original wireless network
when you are done using the
projector.
Presenting Through a Wireless Network
64
3. Make sure Location is set to
Select
Automatic
Select Network Port
Configurations
then select AirPort
4. Select
Network Port Configurations
menu.
5. Under Port Configurations, select
6. Click
Apply Now
7. Click the AirPort icon on the menu bar at the top of the Mac
desktop. You see the AirPort status menu:
Choose the ESSID
you assigned to the
projector
8. Check to make sure AirPort is turned on.
9. Select your projector's ESSID.
.
Automatic
in the Show pull-down
AirPort
. Then close the window.
.