Capturing The Image - Epson PowerLite 1815p User Manual

note
When you choose an image
for the user's logo, it erases
any previously used image.
You can save an image up to
×
300 400 pixels in size.
Fine-Tuning the Projector
130

Capturing the Image

Start by displaying the image you want to use from either a computer
or video source, such as a DVD player or digital camera. Then follow
these steps to capture the image and transfer it to the projector:
1. Press the button on the remote control, highlight the
Menu
menu, and press
Extended
2. Highlight
User's Logo
3. When you see a message asking
, select
user's logo?
over the image.
4. Use the pointer button to select the area of the image you
want to use. Then press
5. When you see the message
and press .
Enter
6. Use the arrow buttons to select a zoom factor (display size) and
press .
Enter
7. When the message
appears, select
Yes
few moments. Do not use your projector, remote control, or
video source while the logo is being saved.
8. When you see the message
menu system.
.
Enter
and press .
Enter
Choose this image as the
and press . A selection box displays
Yes Enter
.
Enter
Select this Image?
Save this image as the user's logo?
and press . Saving the logo may take a
Enter
, press
Completed
, highlight
Yes
to exit the
Menu