Disabling The Projector's Buttons - Epson PowerLite 1815p User Manual

Choosing When to Display the Image
After your image is saved, you can set it to display as the startup
screen, the screen you see when there's no signal, or the screen you see
when you press the
A/V Mute
1. Press the button, highlight the
Menu
.
Enter
2. Select and press
Display
3. Choose from these display options:
Set
■ Display Background
when there is no signal.
Set
■ Startup Screen
projector is warming up.
Set
■
A/V Mute
the
A/V Mute
4. When you're finished, press

Disabling the Projector's Buttons

When you enable the Operation Lock function, you can lock all the
projector's buttons, or all buttons except the
remote control can still be used to operate the projector.
1. Press the button, highlight the
Menu
.
Enter
2. Select
Operation Lock
3. Select (to lock all projector buttons) or
Full Lock
lock all buttons except the
4. Select and press
Yes
5. Press the button to exit.
Menu
To disable the Operation Lock function, select
Lock menu. Or press and hold the
control panel for 7 seconds. A message is displayed and the lock is
released.
button (see page 31).
Extended
.
Enter
to to display your image
Logo
to to display your image when the
On
to to display your image when you press
Logo
button.
to exit.
Menu
Power
Settings
and press the
Enter
button) and press
Power
to confirm the setting.
Enter
button on the projector's
Enter
menu, and press
button. The
menu, and press
button.
(to
Partial Lock
.
Enter
in the Operation
Off
Fine-Tuning the Projector
note
You can lock these settings to
prevent them from being
changed without a password
(see page 127).
131