Epson PowerLite 1815p User Manual page 169

The message
Not Supported
■ Make sure the correct input signal is selected in the Signal menu
(see page 124).
Make sure your computer's resolution doesn't exceed UXGA
■
×
(1600 1200) and the frequency or refresh rate is supported by
the projector (see page 189). If necessary, change your computer's
resolution setting.
Only part of the computer image is displayed.
Press the button on the remote control.
■
Auto
Make sure the image
■
menu. See page 125 for more information.
Press the button on the remote control.
■ Resize
■ Press the button on the remote control to cancel the E-Zoom
Esc
function.
■ Make sure your computer's resolution setting is correct. Ideally, it
×
should be 1024 768 to match the projector's native resolution.
If this option isn't available, select one of the other compatible
video formats listed on page 189.
■ You also may need to modify existing presentation files if you
created them for a different resolution. See your software
documentation for specific information.
The image isn't square, but keystone-shaped.
■ If the image isn't square or rectangular, adjust its shape as
described on page 24.
■ Enable the Auto Keystone feature to automatically fix the shape
when the projector is tilted upward. See page 126.
is displayed.
setting is correct in the Signal
Position
Solving Problems
169