Epson PowerLite 1815p User Manual page 82

note
If you don't see your network
adapter's IP address, allow a
minute for it to appear. If
your access point or AirPort
base station uses DHCP
(
Distribute IP addresses
setting is enabled for
AirPort), sometimes it takes
a minute for the server to
pick up the IP address.
Once you've selected the IP
address for your network
adapter, you won't see the
Switch network dialog
box when you start
NS Connection. If you want
to change to a different
network adapter, click
on the EMP NS
Extension
Connection dialog box, then
click on the
Switch LAN
extension dialog box.
Presenting Through a Wireless Network
82
3. The first time you start NS Connection, you see this dialog box.
Choose a connection mode and click
4. If you see a message asking you to disable the firewall, click
make an exception for the projector and allow projection.
You see the screen below. (If you have previously started NS
Connection, this may be the first screen you see.)
.
OK
Yes
Select projector
to