Replacing The Lamp And Air Filter - Epson PowerLite 1815p User Manual

Epson user'sguide multimedia projector powerlite 1815p
Hide thumbs Also See for PowerLite 1815p:
Table of Contents

Advertisement

note
When you get a replacement
lamp for your projector, you
should replace the filter.
Turn off this product when
not in use to prolong the life
of the projector.
Maintaining the Projector
156

Replacing the Lamp and Air Filter

The life span of the projection lamp is about 2500 hours if
in the Settings menu is set to
Brightness Control
3000 hours if
Brightness Control
check the lamp usage.
It is time to replace the lamp when:
The projected image gets darker or starts to deteriorate.
The message
Replace the lamp
lamp comes on and the lamp warning light
maintain projector brightness and image quality, replace the lamp
as soon as possible.
The lamp warning light
Lamp warning light
Contact your dealer or call Epson at 800-GO-EPSON
(800-463-7766). Request part number V13H010L40.
High
is set to
. See page 159 to
Low
appears on the screen when the
flashes orange. To
flashes red (the lamp is burnt out).
(default), and

Advertisement

Table of Contents
loading

Table of Contents