■
If your network does not assign addresses automatically, turn
off
and enter the projector's
DHCP
,
Mask
Gateway Address
To enter numbers, use the
control to highlight the number you want to input, then press
the
button.
Enter
8. When you're done making all necessary changes, select
select
Setup complete
want to save the changes. Press
Using Projector E-mail Alerts
When this feature is enabled, the projector sends you an e-mail alert if
it has any problems.
1. Press the
button on the remote control, select the
Menu
menu, then press
Network
2. Choose
To Network Configuration
3. Choose
, then press
Mail
You see the following screen:
IP Address
, and
DNS Servers
pointer button on the remote
, and then select
to confirm that you
Yes
to exit the menu system.
Menu
.
Enter
and press
.
Enter
,
Subnet
, as needed.
,
Return
.
Enter
Managing Projectors
note
If you're a network
administrator, you can use
the SNMP option to enter a
trap IP address. This lets you
receive trap alerts for the
projectors you're monitoring.
note
You can also set e-mail alerts
from EMP Monitor (see
page 147).
137