Tray Paper Settings - Ricoh 4035e General Settings Manual

Tray Paper Settings

v Paper Tray Priority: Copier (copier/Document Server)
You can specify the tray to supply paper for output.
Note
r Default: Tray 1
v Paper Tray Priority: Facsimile (facsimile)
You can specify the tray to supply paper for output.
Note
r Default: Tray 1
v Paper Tray Priority: Printer (printer)
You can specify the tray to supply paper for output.
Note
r Default: Tray 1
v Tray Paper Size: Tray 1–4
Select the size of the paper loaded in the paper tray.
• The paper sizes you can set for Tray 1 to Tray 4 are as follows:
• A3L, B4 JIS (Japanese Industrial Standard)L, A4K, A4L, B5 JISK, B5
JISL, A5L
• 11" 17"L,
1
8 / " 13"L, 8
4
1
8" 10 / "K, 8" 10
2
Important
r If the specified paper size differs from the actual size of the paper loaded
in the paper tray, a misfeed might occur because the correct paper size was
not detected.
Note
r Default:
• Tray 1: A4K, 8
• Tray 2: A3L, 11" 17"L
• Tray 3: A4L, 8
• Tray 4: A4L, 8
r The paper guide for the optional LCT is fixed for A4K, 8
paper. Contact your service representative if you need to change the paper
size.
r If the paper size set for the selector in the paper tray is different to the pa-
per size for this setting, the paper size of the selector has priority.
r If you load paper of a size not indicated on the paper size selector in the
paper tray, set the selector to "p".
1 1
8 / " 14"L, 8 /
2 2
1
/ " 14"L, 11" 14"L, 8" 13"L, 7
4
1 1
/ "L, 5 / " 8
2 2
1
/ " 11"K
2
1
/ " 11"L
2
1
/ " 14"L
2
Settings You Can Change with User Tools
1
" 13"L, 8 / " 11"K,
2
1
/ "L
2
1
8 / " 11"L,
2
1 1
/ " 10 / "L,
4 2
1
/ " 11"Ksize
2
4
55