Ricoh 4035e General Settings Manual page 71

v Paper Type: LCT
Sets the display so you can see what type of paper is loaded in the LCT.
• The paper types you can set are as follows:
• recycled paper, special paper, colour paper, letterhead, preprinted pa-
per, prepunched paper, bond paper, cardstock
Note
r Default:
• Paper Type: No Display
• Copying Method in Duplex: 2 Sided Copy
• Apply Auto Paper Select: Yes
r A
appears next to the LCT if [No] is selected in Auto Paper Select.
Limitation
r [Auto Paper Select] can only be selected for the copier function if [No display]
and [Recycled paper] are selected. If [No] is selected, Auto Paper Select is not
valid for the LCT.
v Cover Sheet Tray
Allows you to specify and display the paper tray that is setting cover sheets.
After selecting the paper tray, you can also specify the display timing and
copy method for two-sided copying.
Note
r Default:
• Tray to Program: Off
r Functions using the cover sheet tray setting are the front cover function
and front/back cover function.
r When [At Mode Selected] is selected, cover sheet tray settings only appear
when the cover function or slip sheet function is selected.
r When [Full Time] is selected, the cover sheet tray is always displayed.
r You can set Copying Method in Duplex only when [At Mode Selected] is se-
lected.
Reference
"Covers", Copy Reference
v Slip Sheet Tray
Allows you to specify and display the paper tray that is inserting slip sheets.
After selecting the paper tray, you can also specify the display timing and
copy method for two-sided copying.
Note
r Default:
• Tray to Program: Off
r When [At Mode Selected] is selected, slip sheet tray settings only appear
when the cover function or slip sheet function is selected.
Settings You Can Change with User Tools
4
57