Display Panel - Ricoh 4035e General Settings Manual

Getting Started

Display Panel

The display panel shows machine status, error messages, and function menus.
1
Important
r A force or impact of more than 30 N (about 3 kgf) will damage the display
panel.
Note
r The following display is of a machine with the optional 2 Tray finisher and
LCT installed.
The copying screen is displayed as default after power on.
The function items displayed serve as selector keys. You can select or specify an
item by lightly pressing them.
When you select or specify an item on the display panel, it is highlighted like
. Keys appearing as
Common key operations
The following keys are common to all screens:
v Key list
[OK]
[Cancel]
[UPrev.] [TNext]
[OK] [Yes]
[Clear]
[Exit]
22
cannot be used.
Acknowledges a selected function or entered values, and then returns
to the previous display.
Deletes a selected function or entered values, and then returns to the
previous display.
Moves to the previous or next display when all items cannot be shown
on the same display.
Closes displayed messages.
Cancels entered values but does not change the settings.
Returns to the previous display.